Jet City 333 JCA50H $999
50 watts from a pair of 6L6 power tubes and all the features of our JCA100H makes our JCA50H ideal for gigging musicians who need plenty of stage volume with some nice power amp distortion. The Normal channel can range from clean tones to dirty rock riffs. The Overdrive channel is THE Soldano high-gain lead tone. Pair it up with our JCA48S for a powerful half-stack, or one or two of our JCA24S 2×12 cabs for extra versatility.
Tech Specs:
- Channels:Normal and Overdrive, foot-switchable with included footswitch
- Controls: Normal and Overdrive Gain, Bass, Middle, Treble, Normal and Overdrive Masters, Presence
- Effects Loop: Tube-Buffered Serial
- Footswitch: Normal/Overdrive channel footswitch, included.
- Tubes: 5x 12AX7 Preamp / 2x 6L6 Power
- Cabinetry: Multi-ply, void-free hardwood
- Chassis: 16 gauge, cold-rolled steel
- Output Power: 50 watts into 16 ohm or 2x 8 ohm speaker outputs
- Input Power: Multi-tapped power transformer at 100v/120v/220v/240v and standard IEC connector
- DIMS: 9.5″Hx9.5″Dx25″D
- Weight: 40lbs net
Jet City 333 JCA24S $499
A pair of Jet City Custom Eminence drivers and switchable mono / stereo input jacks gives JCA24S speaker volume and connection options together in one package. JCA24S is a good mate for either JCA20H or with JCA100H. Move the feet and stand it up on one end to make a great looking rig which also brings the controls of your JCA20H within easy reach.
Tech Specs:
- Inputs: 1x8ohm for mono or 2x 16ohm for stereo operation
- Power handling: 200 watts RMS mono or 100 watts RMS per channel for stereo operation
- Cabinetry:Multi-ply, void-free hardwood
- Drivers: 2×12” Jet City Custom Eminence Drivers
- DIMS: 20″Hx28″Wx12″D
- Weight: 40.2lbs net
Jet City 333 JCA2112RC $749
JCA2112RC is a “combo” of our JCA20H and JCA12S, with tube-driven reverb included. Easy-access speaker connectors on the rear panel allow JCA2112RC to drive external cabinets either with or without the internal Jet City Eminence Custom driver. Stacked on an additional JCA12S, the speaker volume doubles and the added height brings the controls to arm’s length in a small club.
Tech Specs:
- Controls: Preamp, Bass, Middle, Treble, Master, Presence
- Tubes: 3x 12AX7 Preamp / 2x 12AX7 Reverb / 2x EL84 Power
- Rectifier: Solid State
- Cabinetry: Multi-ply, void-free hardwood
- Chassis: 16 gauge, cold-rolled steel
- Output Power: 20 watts into 16 ohm or 2x 8 ohm speaker outputs
- Input Power: Multi-tapped power transformer at 100v/120v/220v/240v and standard IEC connector
- Power handling: 100 watts RMS
- Drivers: 1×12” Jet City Custom Eminence Driver at 70watts RMS
- DIMS: 20″Hx21″Wx11″D
- 38.7lbs net
Jet City 333 PicoValve $549
Designed by Andy Marshall and licensed by THD Electronics, PicoValve is our compact, low-wattage tone machine. With dual 12AX7s shaping the preamp voicing, and a single 6L6 in the power section, this caged monster is the real deal. From touch-sensitive and punchy cleans, to beefy, heavey Rock tones, the Pico Valve will get you the tone you want without tearing the paint off the walls. What’s more, you can custom-tailor your Pico by swapping the power tube with nearly any octal-based tube, and there’s no re-biasing necessary. Looking to complete the package? The Pico mates perfectly with the JCA12XS for a handsome and compact micro-stack.
Tech Specs:
- Controls: 5W/2.5W Power Selector, Preamp Gain, Bass, Middle, Treble, Bright Switch, and Master Volume
- Stock Tubes: 2x 12AX7 Preamp / 1x 6L6 Power
- Compatible Power Tubes: EL34, 6L6, 5881, KT88, 6550, 5881, 6V6, EL84 (with adaptor)….see manual for exhaustive list.
- Rectifier: Solid State
- Cabinetry: Perforated, cold-rolled steel
- Chassis: 16 gauge, cold-rolled steel
- Output Power: 5W/2.5W into 4, 8 or 16-ohm speaker outputs
- Input Power: Multi-tapped power transformer at 120v/220v and standard IEC connector
- DIMS: 6.5″Hx7″Dx12.5″W
- Weight: 21 lbs net
Jet City 333 JCA12XS - $249
The JCA12XS uses the same 100-watt, custom Eminence driver as the 12S, 24S and 48S cabinets, but conveys more of a midrange “growl” thanks to its compact footprint. With its matching perforation pattern and mini badge, it’s the perfect companion for the 5-watt PicoValve, but is fully capable of cranked, 100-watt operation. A convertible rear panel allows you to the 12XS in half-open or closed-back configuration, so “tuning for the room” is as simple as removing 3 screws.
Tech Specs:
- Inputs: 1x16ohm
- Power handling: 100 watts RMS
- Cabinetry: Multi-ply, void-free hardwood
- Drivers: 1×12” Jet City Custom Eminence Driver
- Dims: 14″Hx14″Wx7″D
- Weight: 18 lbs net
